Technical Specifications (subject to change)        

• Temperature range: -180°C ... 500°C, RT ... 1100°C, RT ... 1600°C (standard)
  (3 exchangeable furnace types)
• Heating and cooling rates: 0.01 K/min ... 50 K/min (dependent on furnace)
• Sample holder:
  fused silica <1100°C
  Al2O3 <1600°C
• Measuring ranges: 500/5000 µm
• Sample length: max. 25 mm
• Sample diameter: max. 6 mm
• l resolution: 0.125 nm / 1.25 nm
• Atmospheres: inert, oxidizing, reducing, static and dynamic
• Gas flow meter and valve for purge gas (optional)
• c-DTA® for the calculated DTA-signal from dilatometer measurements for one sample, ideal for temperature calibration (optional)
• Highly vacuum-tight up to 10-4 mbar (10-2 Pa)
• Coupling to QMS 403 C Aëolos® over a heatable adapter at the exit of the furnace